Online banjo tuner

Pick a string. The tuner names it and shows whether to tune up or down.

Press Start and play one note.

A4 = 440 Hz

Strings
Display

The sound is analysed on your device. Nothing is recorded or sent. The tuner follows the string you play. Tap a string to hear its note and lock the tuner on it.

Strings and frequencies

String Note Frequency (A4 = 440 Hz)
5 G 4 392.00 Hz
4 D 3 146.83 Hz
3 G 3 196.00 Hz
2 B 3 246.94 Hz
1 D 4 293.66 Hz

Alternate tunings

How to tune a five-string banjo

Press Start the microphone and pick the fourth string, the thick D. The tuner shows the string and the gap: needle to the left, the string is flat; to the right, it is sharp. Turn the peg until the needle is in the green zone, then tune the third string (G), the second (B) and the first (D).

Finish with the fifth string, the short one, tuned to the G an octave above the third string. Its peg is geared differently and turns faster than the others: move it in small steps.

In order from the fifth string to the first, standard tuning is G D G B D, written gDGBD with a small g for the high drone string.

Other tunings

The list under the dial includes the tunings old-time and bluegrass players switch to:

  • Double C (gCGCD): the fourth string goes down to C and the second up to C.
  • C tuning (gCGBD): only the fourth string changes, down to C.
  • G modal or sawmill (gDGCD): the second string goes up to C.
  • Open D (f♯DF♯AD): the fifth and third strings go down to F♯ and the second down to A.

Choosing a tuning changes the string buttons and the notes the tuner listens for.

The bridge and the head

A banjo’s bridge is held in place only by the strings. If the notes go sharp as you play up the neck although the open strings are in tune, the bridge has moved: the twelfth-fret harmonic and the note fretted at the twelfth fret should match. Changes of humidity tighten or slacken the head and shift the tuning too, so a banjo needs checking more often than a guitar.

Notes and frequencies are on the banjo tuning and tenor banjo tuning pages. For a banjolele, tuned like a ukulele, use the ukulele tuner.

Questions and answers

What is the standard tuning of a five-string banjo?

Open G: G D G B D. The short fifth string is the high G; the four long strings are D, G, B and D from the fourth to the first. Strummed open, they sound a G major chord.

Why is the fifth string listed first?

Because it lies on top when you hold the banjo, under your thumb. It is the shortest string and the highest in pitch, and its peg is on the side of the neck at the fifth fret.

How do I tune a tenor banjo?

Choose Tenor in the tuning list for C G D A, or Irish tenor for G D A E, an octave below a fiddle. A four-string tenor banjo is tuned in fifths, unlike the five-string.

The note fades before the needle settles.

A banjo has a sharp attack and little sustain. Pick the string firmly near the bridge, read the needle straight away, then pick again. Several short readings work better than waiting for one long note.

Updated November 15, 2026